How to fix a laptop charging port

Laptop charging port

Nothing is worse than using your laptop on a project when the battery suddenly runs low. They hurry to plug it in, but nothing happens.

Assuming the outlet is working fine, there is likely a problem with your charging port. Here are some tips on how to determine if your laptop’s charging port is broken and how to fix it.

Remove dust or dirt

The first thing you should do is clean the port as best you can. There is a chance that the problem with the power connector is related to dust or dirt inside the connector.

The actual process of cleaning your charging port depends on the type of laptop you have.

Compressed air can be purchased at any electronics or office supply store near you. Use the straw to shoot air into the charging port in 1 to 2 seconds.

However, it is recommended not to use these sockets for Apple Lightning ports.

If there is noticeable lint in the port, you can use a toothpick with some cotton on the end to wipe it off.

Check the connector

Another thing to do before using a laptop repair facility is to check the actual connector and power supply chip for defects.

If nothing is visibly wrong with it, try it on another device and see if it delivers a charge. You can always go to a local repair shop to check that it works if you don’t have a voltmeter yourself.

Replacing the power supply chip can often be much cheaper and easier than repairing the charging port.

Battery malfunction

The problem with your laptop may be battery related.

You can run scans with your computer to check the condition of your battery. If the battery is removable, you can also remove it, use the remaining power in your device and try the plug again.

If the laptop turns on with no battery, now you know the culprit. With non-removable batteries, you will likely need to seek help.

Faulty laptop charging port

If everything else is working or working properly, check to see if your laptop’s charging port is loose or broken. Unfortunately, it’s not an easy task at home.

For those interested in technology, there are many guides online that describe how to disassemble your particular laptop. In some cases, a loose connector can be soldered back onto the motherboard.

If you’re not ready to break your warranty and are at risk of damaging your only computers, consider getting professional repairs.

Ifixomaha.com provides tips on how to repair your devices at home. You can also visit one of the various locations in Omaha to get your PC or Mac repaired.

Turn on your laptop

Don’t let a faulty laptop charging port ruin your day. Either repair it yourself or have it repaired by a professional and bypass it by mail to the manufacturer.

For more similar tips and information, see our other articles.

Leave a Reply

Your email address will not be published. Required fields are marked *